\
; http://php.net/date.sunrise-zenith
\
;date.sunrise_zenith = 90.583333
\
\
; http://php.net/date.sunset-zenith
\
;date.sunset_zenith = 90.583333
\
\
[filter]
\
; http://php.net/filter.default
\
;filter.default = unsafe_raw
\
\
; http://php.net/filter.default-flags
\
;filter.default_flags =
\
\
[iconv]
\
; Use of this INI entry is deprecated, use global input_encoding instead.
\
; If empty, default_charset or input_encoding or iconv.input_encoding is used.
\
; The precedence is: default_charset < input_encoding < iconv.input_encoding
\
;iconv.input_encoding =
\
\
; Use of this INI entry is deprecated, use global internal_encoding instead.
\
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
\
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
\
;iconv.internal_encoding =
\
\
; Use of this INI entry is deprecated, use global output_encoding instead.
\
; If empty, default_charset or output_encoding or iconv.output_encoding is used.
\
; The precedence is: default_charset < output_encoding < iconv.output_encoding
\
; To use an output encoding conversion, iconv's output handler must be set
\
; otherwise output encoding conversion cannot be performed.
\
;iconv.output_encoding =
\
\
[imap]
\
; rsh/ssh logins are disabled by default. Use this INI entry if you want to
\
; enable them. Note that the IMAP library does not filter mailbox names before
\
; passing them to rsh/ssh command, thus passing untrusted data to this function
\
; with rsh/ssh enabled is insecure.
\
;imap.enable_insecure_rsh=0
\
\
[intl]
\
;intl.default_locale =
\
; This directive allows you to produce PHP errors when some error
\
; happens within intl functions. The value is the level of the error produced.
\
; Default is 0, which does not produce any errors.
\
;intl.error_level = E_WARNING
\
;intl.use_exceptions = 0
\
\
[sqlite3]
\
; Directory pointing to SQLite3 extensions
\
; http://php.net/sqlite3.extension-dir
\
;sqlite3.extension_dir =
\
\
; SQLite defensive mode flag (only available from SQLite 3.26+)
\
; When the defensive flag is enabled, language features that allow ordinary
\
; SQL to deliberately corrupt the database file are disabled. This forbids
\
; writing directly to the schema, shadow tables (eg. FTS data tables), or
\
; the sqlite_dbpage virtual table.
\
; https://www.sqlite.org/c3ref/c_dbconfig_defensive.html
\
; (for older SQLite versions, this flag has no use)
\
;sqlite3.defensive = 1
\
\
[Pcre]
\
; PCRE library backtracking limit.
\
; http://php.net/pcre.backtrack-limit
\
;pcre.backtrack_limit=100000
\
\
; PCRE library recursion limit.
\
; Please note that if you set this value to a high number you may consume all
\
; the available process stack and eventually crash PHP (due to reaching the
\
; stack size limit imposed by the Operating System).
\
; http://php.net/pcre.recursion-limit
\
;pcre.recursion_limit=100000
\
\
; Enables or disables JIT compilation of patterns. This requires the PCRE
\
; library to be compiled with JIT support.
\
;pcre.jit=1
\
\
[Pdo]
\
pdo_mysql.default_socket="MySQL"
\
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
\
; http://php.net/pdo-odbc.connection-pooling
\
;pdo_odbc.connection_pooling=strict
\
\
;pdo_odbc.db2_instance_name
\
\
[Pdo_mysql]
\
; Default socket name for local MySQL connects. If empty, uses the built-in
\
; MySQL defaults.
\
pdo_mysql.default_socket=
\
\
[Phar]
\
; http://php.net/phar.readonly
\
;phar.readonly = On
\
\
; http://php.net/phar.require-hash
\
;phar.require_hash = On
\
\
;phar.cache_list =
\
\
[mail function]
\
; For Win32 only.
\
; http://php.net/smtp
\
SMTP=localhost
\
; http://php.net/smtp-port
\
smtp_port=25
\
\
; For Win32 only.
\
; http://php.net/sendmail-from
\
;sendmail_from = me@example.com
\
\
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
\
; http://php.net/sendmail-path
\
;sendmail_path =
\
\
; Force the addition of the specified parameters to be passed as extra parameters
\
; to the sendmail binary. These parameters will always replace the value of
\
; the 5th parameter to mail().
\
;mail.force_extra_parameters =
\
\
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
\
mail.add_x_header=Off
\
\
; The path to a log file that will log all mail() calls. Log entries include
\
; the full path of the script, line number, To address and headers.
\
;mail.log =
\
; Log mail to syslog (Event Log on Windows).
\
;mail.log = syslog
\
\
[ODBC]
\
; http://php.net/odbc.default-db
\
;odbc.default_db = Not yet implemented
\
\
; http://php.net/odbc.default-user
\
;odbc.default_user = Not yet implemented
\
\
; http://php.net/odbc.default-pw
\
;odbc.default_pw = Not yet implemented
\
\
; Controls the ODBC cursor model.
\
; Default: SQL_CURSOR_STATIC (default).
\
;odbc.default_cursortype
\
\
; Allow or prevent persistent links.
\
; http://php.net/odbc.allow-persistent
\
odbc.allow_persistent=On
\
\
; Check that a connection is still valid before reuse.
\
; http://php.net/odbc.check-persistent
\
odbc.check_persistent=On
\
\
; Maximum number of persistent links. -1 means no limit.
\
; http://php.net/odbc.max-persistent
\
odbc.max_persistent=-1
\
\
; Maximum number of links (persistent + non-persistent). -1 means no limit.
\
; http://php.net/odbc.max-links
\
odbc.max_links=-1
\
\
; Handling of LONG fields. Returns number of bytes to variables. 0 means
\
; passthru.
\
; http://php.net/odbc.defaultlrl
\
odbc.defaultlrl=4096
\
\
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
\
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
\
; of odbc.defaultlrl and odbc.defaultbinmode
\
; http://php.net/odbc.defaultbinmode
\
odbc.defaultbinmode=1
\
\
[Interbase]
\
; Allow or prevent persistent links.
\
ibase.allow_persistent=1
\
\
; Maximum number of persistent links. -1 means no limit.
\
ibase.max_persistent=-1
\
\
; Maximum number of links (persistent + non-persistent). -1 means no limit.
\
ibase.max_links=-1
\
\
; Default database name for ibase_connect().
\
;ibase.default_db =
\
\
; Default username for ibase_connect().
\
;ibase.default_user =
\
\
; Default password for ibase_connect().
\
;ibase.default_password =
\
\
; Default charset for ibase_connect().
\
;ibase.default_charset =
\
\
; Default timestamp format.
\
ibase.timestampformat="%Y-%m-%d %H:%M:%S"
\
\
; Default date format.
\
ibase.dateformat="%Y-%m-%d"
\
\
; Default time format.
\
ibase.timeformat="%H:%M:%S"
\
\
[MySQLi]
\
\
; Maximum number of persistent links. -1 means no limit.
\
; http://php.net/mysqli.max-persistent
\
mysqli.max_persistent=-1
\
\
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
\
; http://php.net/mysqli.allow_local_infile
\
;mysqli.allow_local_infile = On
\
\
; Allow or prevent persistent links.
\
; http://php.net/mysqli.allow-persistent
\
mysqli.allow_persistent=On
\
\
; Maximum number of links. -1 means no limit.
\
; http://php.net/mysqli.max-links
\
mysqli.max_links=-1
\
\
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
\
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
\
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
\
; at MYSQL_PORT.
\
; http://php.net/mysqli.default-port
\
mysqli.default_port=3306
\
\
; Default socket name for local MySQL connects. If empty, uses the built-in
\
; MySQL defaults.
\
; http://php.net/mysqli.default-socket
\
mysqli.default_socket=
\
\
; Default host for mysql_connect() (doesn't apply in safe mode).
\
; http://php.net/mysqli.default-host
\
mysqli.default_host=
\
\
; Default user for mysql_connect() (doesn't apply in safe mode).
\
; http://php.net/mysqli.default-user
\
mysqli.default_user=
\
\
; Default password for mysqli_connect() (doesn't apply in safe mode).
\
; Note that this is generally a *bad* idea to store passwords in this file.
\
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
\
; and reveal this password! And of course, any users with read access to this
\
; file will be able to reveal the password as well.
\
; http://php.net/mysqli.default-pw
\
mysqli.default_pw=
\
\
; Allow or prevent reconnect
\
mysqli.reconnect=Off
\
\
[mysqlnd]
\
; Enable / Disable collection of general statistics by mysqlnd which can be
\
; used to tune and monitor MySQL operations.
\
mysqlnd.collect_statistics=On
\
\
; Enable / Disable collection of memory usage statistics by mysqlnd which can be
\
; used to tune and monitor MySQL operations.
\
mysqlnd.collect_memory_statistics=On
\
\
; Records communication from all extensions using mysqlnd to the specified log
\
; file.
\
; http://php.net/mysqlnd.debug
\
;mysqlnd.debug =
\
\
; Defines which queries will be logged.
\
;mysqlnd.log_mask = 0
\
\
; Default size of the mysqlnd memory pool, which is used by result sets.
\
;mysqlnd.mempool_default_size = 16000
\
\
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
\
;mysqlnd.net_cmd_buffer_size = 2048
\
\
; Size of a pre-allocated buffer used for reading data sent by the server in
\
; bytes.
\
;mysqlnd.net_read_buffer_size = 32768
\
\
; Timeout for network requests in seconds.
\
;mysqlnd.net_read_timeout = 31536000
\
\
; SHA-256 Authentication Plugin related. File with the MySQL server public RSA
\
; key.
\
;mysqlnd.sha256_server_public_key =
\
\
[OCI8]
\
\
; Connection: Enables privileged connections using external
\
; credentials (OCI_SYSOPER, OCI_SYSDBA)
\
; http://php.net/oci8.privileged-connect
\
;oci8.privileged_connect = Off
\
\
; Connection: The maximum number of persistent OCI8 connections per
\
; process. Using -1 means no limit.
\
; http://php.net/oci8.max-persistent
\
;oci8.max_persistent = -1
\
\
; Connection: The maximum number of seconds a process is allowed to
\
; maintain an idle persistent connection. Using -1 means idle
\
; persistent connections will be maintained forever.
\
; http://php.net/oci8.persistent-timeout
\
;oci8.persistent_timeout = -1
\
\
; Connection: The number of seconds that must pass before issuing a
\
; ping during oci_pconnect() to check the connection validity. When
\
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
\
; pings completely.
\
; http://php.net/oci8.ping-interval
\
;oci8.ping_interval = 60
\
\
; Connection: Set this to a user chosen connection class to be used
\
; for all pooled server requests with Oracle 11g Database Resident
\
; Connection Pooling (DRCP). To use DRCP, this value should be set to
\
; the same string for all web servers running the same application,
\
; the database pool must be configured, and the connection string must
\
; specify to use a pooled server.
\
;oci8.connection_class =
\
\
; High Availability: Using On lets PHP receive Fast Application
\
; Notification (FAN) events generated when a database node fails. The
\
; database must also be configured to post FAN events.
\
;oci8.events = Off
\
\
; Tuning: This option enables statement caching, and specifies how
\
; many statements to cache. Using 0 disables statement caching.
\
; http://php.net/oci8.statement-cache-size
\
;oci8.statement_cache_size = 20
\
\
; Tuning: Enables statement prefetching and sets the default number of
\
; rows that will be fetched automatically after statement execution.
\
; http://php.net/oci8.default-prefetch
\
;oci8.default_prefetch = 100
\
\
; Compatibility. Using On means oci_close() will not close
\
; oci_connect() and oci_new_connect() connections.
\
; http://php.net/oci8.old-oci-close-semantics
\
;oci8.old_oci_close_semantics = Off
\
\
[PostgreSQL]
\
; Allow or prevent persistent links.
\
; http://php.net/pgsql.allow-persistent
\
pgsql.allow_persistent=On
\
\
; Detect broken persistent links always with pg_pconnect().
\
; Auto reset feature requires a little overheads.
\
; http://php.net/pgsql.auto-reset-persistent
\
pgsql.auto_reset_persistent=Off
\
\
; Maximum number of persistent links. -1 means no limit.
\
; http://php.net/pgsql.max-persistent
\
pgsql.max_persistent=-1
\
\
; Maximum number of links (persistent+non persistent). -1 means no limit.
\
; http://php.net/pgsql.max-links
\
pgsql.max_links=-1
\
\
; Ignore PostgreSQL backends Notice message or not.
\
; Notice message logging require a little overheads.
\
; http://php.net/pgsql.ignore-notice
\
pgsql.ignore_notice=0
\
\
; Log PostgreSQL backends Notice message or not.
\
; Unless pgsql.ignore_notice=0, module cannot log notice message.
\
; http://php.net/pgsql.log-notice
\
pgsql.log_notice=0
\
\
[bcmath]
\
; Number of decimal digits for all bcmath functions.
\
; http://php.net/bcmath.scale
\
bcmath.scale=0
\
\
[browscap]
\
; http://php.net/browscap
\
browscap="C:\\xampp\\php\\extras\\browscap.ini"
\
\
[Session]
\
; Handler used to store/retrieve data.
\
; http://php.net/session.save-handler
\
session.save_handler=files
\
\
; Argument passed to save_handler. In the case of files, this is the path
\
; where data files are stored. Note: Windows users have to change this
\
; variable in order to use PHP's session functions.
\
;
\
; The path can be defined as:
\
;
\
; session.save_path = "N;/path"
\
;
\
; where N is an integer. Instead of storing all the session files in
\
; /path, what this will do is use subdirectories N-levels deep, and
\
; store the session data in those directories. This is useful if
\
; your OS has problems with many files in one directory, and is
\
; a more efficient layout for servers that handle many sessions.
\
;
\
; NOTE 1: PHP will not create this directory structure automatically.
\
; You can use the script in the ext/session dir for that purpose.
\
; NOTE 2: See the section on garbage collection below if you choose to
\
; use subdirectories for session storage
\
;
\
; The file storage module creates files using mode 600 by default.
\
; You can change that by using
\
;
\
; session.save_path = "N;MODE;/path"
\
;
\
; where MODE is the octal representation of the mode. Note that this
\
; does not overwrite the process's umask.
\
; http://php.net/session.save-path
\
session.save_path="C:\\xampp\\tmp"
\
\
; Whether to use strict session mode.
\
; Strict session mode does not accept an uninitialized session ID, and
\
; regenerates the session ID if the browser sends an uninitialized session ID.
\
; Strict mode protects applications from session fixation via a session adoption
\
; vulnerability. It is disabled by default for maximum compatibility, but
\
; enabling it is encouraged.
\
; https://wiki.php.net/rfc/strict_sessions
\
session.use_strict_mode=0
\
\
; Whether to use cookies.
\
; http://php.net/session.use-cookies
\
session.use_cookies=1
\
\
; http://php.net/session.cookie-secure
\
;session.cookie_secure =
\
\
; This option forces PHP to fetch and use a cookie for storing and maintaining
\
; the session id. We encourage this operation as it's very helpful in combating
\
; session hijacking when not specifying and managing your own session id. It is
\
; not the be-all and end-all of session hijacking defense, but it's a good start.
\
; http://php.net/session.use-only-cookies
\
session.use_only_cookies=1
\
\
; Name of the session (used as cookie name).
\
; http://php.net/session.name
\
session.name=PHPSESSID
\
\
; Initialize session on request startup.
\
; http://php.net/session.auto-start
\
session.auto_start=0
\
\
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
\
; http://php.net/session.cookie-lifetime
\
session.cookie_lifetime=0
\
\
; The path for which the cookie is valid.
\
; http://php.net/session.cookie-path
\
session.cookie_path=/
\
\
; The domain for which the cookie is valid.
\
; http://php.net/session.cookie-domain
\
session.cookie_domain=
\
\
; Whether or not to add the httpOnly flag to the cookie, which makes it
\
; inaccessible to browser scripting languages such as JavaScript.
\
; http://php.net/session.cookie-httponly
\
session.cookie_httponly=
\
\
; Add SameSite attribute to cookie to help mitigate Cross-Site Request Forgery (CSRF/XSRF)
\
; Current valid values are "Lax" or "Strict"
\
; https://tools.ietf.org/html/draft-west-first-party-cookies-07
\
session.cookie_samesite=
\
\
; Handler used to serialize data. php is the standard serializer of PHP.
\
; http://php.net/session.serialize-handler
\
session.serialize_handler=php
\
\
; Defines the probability that the 'garbage collection' process is started on every
\
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
\
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
\
; Default Value: 1
\
; Development Value: 1
\
; Production Value: 1
\
; http://php.net/session.gc-probability
\
session.gc_probability=1
\
\
; Defines the probability that the 'garbage collection' process is started on every
\
; session initialization. The probability is calculated by using gc_probability/gc_divisor,
\
; e.g. 1/100 means there is a 1% chance that the GC process starts on each request.
\
; For high volume production servers, using a value of 1000 is a more efficient approach.
\
; Default Value: 100
\
; Development Value: 1000
\
; Production Value: 1000
\
; http://php.net/session.gc-divisor
\
session.gc_divisor=1000
\
\
; After this number of seconds, stored data will be seen as 'garbage' and
\
; cleaned up by the garbage collection process.
\
; http://php.net/session.gc-maxlifetime
\
session.gc_maxlifetime=1440
\
\
; NOTE: If you are using the subdirectory option for storing session files
\
; (see session.save_path above), then garbage collection does *not*
\
; happen automatically. You will need to do your own garbage
\
; collection through a shell script, cron entry, or some other method.
\
; For example, the following script would is the equivalent of
\
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
\
; find /path/to/sessions -cmin +24 -type f | xargs rm
\
\
; Check HTTP Referer to invalidate externally stored URLs containing ids.
\
; HTTP_REFERER has to contain this substring for the session to be
\
; considered as valid.
\
; http://php.net/session.referer-check
\
session.referer_check=
\
\
; Set to \{nocache,private,public,\} to determine HTTP caching aspects
\
; or leave this empty to avoid sending anti-caching headers.
\
; http://php.net/session.cache-limiter
\
session.cache_limiter=nocache
\
\
; Document expires after n minutes.
\
; http://php.net/session.cache-expire
\
session.cache_expire=180
\
\
; trans sid support is disabled by default.
\
; Use of trans sid may risk your users' security.
\
; Use this option with caution.
\
; - User may send URL contains active session ID
\
; to other person via. email/irc/etc.
\
; - URL that contains active session ID may be stored
\
; in publicly accessible computer.
\
; - User may access your site with the same session ID
\
; always using URL stored in browser's history or bookmarks.
\
; http://php.net/session.use-trans-sid
\
session.use_trans_sid=0
\
\
; Set session ID character length. This value could be between 22 to 256.
\
; Shorter length than default is supported only for compatibility reason.
\
; Users should use 32 or more chars.
\
; http://php.net/session.sid-length
\
; Default Value: 32
\
; Development Value: 26
\
; Production Value: 26
\
session.sid_length=26
\
\
; The URL rewriter will look for URLs in a defined set of HTML tags.
\
; <form> is special; if you include them here, the rewriter will
\
; add a hidden <input> field with the info which is otherwise appended
\
; to URLs. <form> tag's action attribute URL will not be modified
\
; unless it is specified.
\
; Note that all valid entries require a "=", even if no value follows.
\
; Default Value: "a=href,area=href,frame=src,form="
\
; Development Value: "a=href,area=href,frame=src,form="
\
; Production Value: "a=href,area=href,frame=src,form="
\
; http://php.net/url-rewriter.tags
\
session.trans_sid_tags="a=href,area=href,frame=src,form="
\
\
; URL rewriter does not rewrite absolute URLs by default.
\
; To enable rewrites for absolute paths, target hosts must be specified
\
; at RUNTIME. i.e. use ini_set()
\
; <form> tags is special. PHP will check action attribute's URL regardless
\
; of session.trans_sid_tags setting.
\
; If no host is defined, HTTP_HOST will be used for allowed host.
\
; Example value: php.net,www.php.net,wiki.php.net
\
; Use "," for multiple hosts. No spaces are allowed.
\
; Default Value: ""
\
; Development Value: ""
\
; Production Value: ""
\
;session.trans_sid_hosts=""
\
\
; Define how many bits are stored in each character when converting
\
; the binary hash data to something readable.
\
; Possible values:
\
; 4 (4 bits: 0-9, a-f)
\
; 5 (5 bits: 0-9, a-v)
\
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
\
; Default Value: 4
\
; Development Value: 5
\
; Production Value: 5
\
; http://php.net/session.hash-bits-per-character
\
session.sid_bits_per_character=5
\
\
; Enable upload progress tracking in $_SESSION
\
; Default Value: On
\
; Development Value: On
\
; Production Value: On
\
; http://php.net/session.upload-progress.enabled
\
;session.upload_progress.enabled = On
\
\
; Cleanup the progress information as soon as all POST data has been read
\
; (i.e. upload completed).
\
; Default Value: On
\
; Development Value: On
\
; Production Value: On
\
; http://php.net/session.upload-progress.cleanup
\
;session.upload_progress.cleanup = On
\
\
; A prefix used for the upload progress key in $_SESSION
\
; Default Value: "upload_progress_"
\
; Development Value: "upload_progress_"
\
; Production Value: "upload_progress_"
\
; http://php.net/session.upload-progress.prefix
\
;session.upload_progress.prefix = "upload_progress_"
\
\
; The index name (concatenated with the prefix) in $_SESSION
\
; containing the upload progress information
\
; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
\
; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
\
; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
\
; http://php.net/session.upload-progress.name
\
;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
\
\
; How frequently the upload progress should be updated.
\
; Given either in percentages (per-file), or in bytes
\
; Default Value: "1%"
\
; Development Value: "1%"
\
; Production Value: "1%"
\
; http://php.net/session.upload-progress.freq
\
;session.upload_progress.freq = "1%"
\
\
; The minimum delay between updates, in seconds
\
; Default Value: 1
\
; Development Value: 1
\
; Production Value: 1
\
; http://php.net/session.upload-progress.min-freq
\
;session.upload_progress.min_freq = "1"
\
\
; Only write session data when session data is changed. Enabled by default.
\
; http://php.net/session.lazy-write
\
;session.lazy_write = On
\
\
[Assertion]
\
; Switch whether to compile assertions at all (to have no overhead at run-time)
\
; -1: Do not compile at all
\
; 0: Jump over assertion at run-time
\
; 1: Execute assertions
\
; Changing from or to a negative value is only possible in php.ini! (For turning assertions on and off at run-time, see assert.active, when zend.assertions = 1)
\
; Default Value: 1
\
; Development Value: 1
\
; Production Value: -1
\
; http://php.net/zend.assertions
\
zend.assertions=1
\
\
; Assert(expr); active by default.
\
; http://php.net/assert.active
\
;assert.active = On
\
\
; Throw an AssertionError on failed assertions
\
; http://php.net/assert.exception
\
;assert.exception = On
\
\
; Issue a PHP warning for each failed assertion. (Overridden by assert.exception if active)
\
; http://php.net/assert.warning
\
;assert.warning = On
\
\
; Don't bail out by default.
\
; http://php.net/assert.bail
\
;assert.bail = Off
\
\
; User-function to be called if an assertion fails.
\
; http://php.net/assert.callback
\
;assert.callback = 0
\
\
; Eval the expression with current error_reporting(). Set to true if you want
\
; error_reporting(0) around the eval().
\
; http://php.net/assert.quiet-eval
\
;assert.quiet_eval = 0
\
\
[COM]
\
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
\
; http://php.net/com.typelib-file
\
;com.typelib_file =
\
\
; allow Distributed-COM calls
\
; http://php.net/com.allow-dcom
\
;com.allow_dcom = true
\
\
; autoregister constants of a component's typlib on com_load()
\
; http://php.net/com.autoregister-typelib
\
;com.autoregister_typelib = true
\
\
; register constants casesensitive
\
; http://php.net/com.autoregister-casesensitive
\
;com.autoregister_casesensitive = false
\
\
; show warnings on duplicate constant registrations
\
; http://php.net/com.autoregister-verbose
\
;com.autoregister_verbose = true
\
\
; The default character set code-page to use when passing strings to and from COM objects.
\
; Default: system ANSI code page
\
;com.code_page=
\
\
[mbstring]
\
; language for internal character representation.
\
; This affects mb_send_mail() and mbstring.detect_order.
\
; http://php.net/mbstring.language
\
;mbstring.language = Japanese
\
\
; Use of this INI entry is deprecated, use global internal_encoding instead.
\
; internal/script encoding.
\
; Some encoding cannot work as internal encoding. (e.g. SJIS, BIG5, ISO-2022-*)
\
; If empty, default_charset or internal_encoding or iconv.internal_encoding is used.
\
; The precedence is: default_charset < internal_encoding < iconv.internal_encoding
\
;mbstring.internal_encoding =
\
\
; Use of this INI entry is deprecated, use global input_encoding instead.
\
; http input encoding.
\
; mbstring.encoding_translation = On is needed to use this setting.
\
; If empty, default_charset or input_encoding or mbstring.input is used.
\
; The precedence is: default_charset < input_encoding < mbsting.http_input
\
; http://php.net/mbstring.http-input
\
;mbstring.http_input =
\
\
; Use of this INI entry is deprecated, use global output_encoding instead.
\
; http output encoding.
\
; mb_output_handler must be registered as output buffer to function.
\
; If empty, default_charset or output_encoding or mbstring.http_output is used.
\
; The precedence is: default_charset < output_encoding < mbstring.http_output
\
; To use an output encoding conversion, mbstring's output handler must be set
\
; otherwise output encoding conversion cannot be performed.
\
; http://php.net/mbstring.http-output
\
;mbstring.http_output =
\
\
; enable automatic encoding translation according to
\
; mbstring.internal_encoding setting. Input chars are
\
; converted to internal encoding by setting this to On.
\
; Note: Do _not_ use automatic encoding translation for
\
; portable libs/applications.
\
; http://php.net/mbstring.encoding-translation
\
;mbstring.encoding_translation = Off
\
\
; automatic encoding detection order.
\
; "auto" detect order is changed according to mbstring.language
\
; http://php.net/mbstring.detect-order
\
;mbstring.detect_order = auto
\
\
; substitute_character used when character cannot be converted
\
; one from another
\
; http://php.net/mbstring.substitute-character
\
;mbstring.substitute_character = none
\
\
; overload(replace) single byte functions by mbstring functions.
\
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
\
; etc. Possible values are 0,1,2,4 or combination of them.
\
; For example, 7 for overload everything.
\
; 0: No overload
\
; 1: Overload mail() function
\
; 2: Overload str*() functions
\
; 4: Overload ereg*() functions
\
; http://php.net/mbstring.func-overload
\
;mbstring.func_overload = 0
\
\
; enable strict encoding detection.
\
; Default: Off
\
;mbstring.strict_detection = On
\
\
; This directive specifies the regex pattern of content types for which mb_output_handler()
\
; is activated.
\
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\\+xml)
\
;mbstring.http_output_conv_mimetype=
\
\
; This directive specifies maximum stack depth for mbstring regular expressions. It is similar
\
; to the pcre.recursion_limit for PCRE.
\
; Default: 100000
\
;mbstring.regex_stack_limit=100000
\
\
[gd]
\
; Tell the jpeg decode to ignore warnings and try to create
\
; a gd image. The warning will then be displayed as notices
\
; disabled by default
\
; http://php.net/gd.jpeg-ignore-warning
\
;gd.jpeg_ignore_warning = 1
\
\
[exif]
\
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
\
; With mbstring support this will automatically be converted into the encoding
\
; given by corresponding encode setting. When empty mbstring.internal_encoding
\
; is used. For the decode settings you can distinguish between motorola and
\
; intel byte order. A decode setting cannot be empty.
\
; http://php.net/exif.encode-unicode
\
;exif.encode_unicode = ISO-8859-15
\
\
; http://php.net/exif.decode-unicode-motorola
\
;exif.decode_unicode_motorola = UCS-2BE
\
\
; http://php.net/exif.decode-unicode-intel
\
;exif.decode_unicode_intel = UCS-2LE
\
\
; http://php.net/exif.encode-jis
\
;exif.encode_jis =
\
\
; http://php.net/exif.decode-jis-motorola
\
;exif.decode_jis_motorola = JIS
\
\
; http://php.net/exif.decode-jis-intel
\
;exif.decode_jis_intel = JIS
\
\
[Tidy]
\
; The path to a default tidy configuration file to use when using tidy
\
; http://php.net/tidy.default-config
\
;tidy.default_config = /usr/local/lib/php/default.tcfg
\
\
; Should tidy clean and repair output automatically?
\
; WARNING: Do not use this option if you are generating non-html content
\
; such as dynamic images
\
; http://php.net/tidy.clean-output
\
tidy.clean_output=Off
\
\
[soap]
\
; Enables or disables WSDL caching feature.
\
; http://php.net/soap.wsdl-cache-enabled
\
soap.wsdl_cache_enabled=1
\
\
; Sets the directory name where SOAP extension will put cache files.
\
; http://php.net/soap.wsdl-cache-dir
\
soap.wsdl_cache_dir="/tmp"
\
\
; (time to live) Sets the number of second while cached file will be used
\
; instead of original one.
\
; http://php.net/soap.wsdl-cache-ttl
\
soap.wsdl_cache_ttl=86400
\
\
; Sets the size of the cache limit. (Max. number of WSDL files to cache)
\
soap.wsdl_cache_limit=5
\
\
[sysvshm]
\
; A default size of the shared memory segment
\
;sysvshm.init_mem = 10000
\
\
[ldap]
\
; Sets the maximum number of open links or -1 for unlimited.
\
ldap.max_links=-1
\
\
[dba]
\
;dba.default_handler=
\
\
[opcache]
\
; Determines if Zend OPCache is enabled\
Zend_extension="php_opcache.dll"\
opcache.enable=1\
\
; Determines if Zend OPCache is enabled for the CLI version of PHP
\
;opcache.enable_cli=0
\
\
; The OPcache shared memory storage size.
\
;opcache.memory_consumption=128
\
\
; The amount of memory for interned strings in Mbytes.
\
;opcache.interned_strings_buffer=8
\
\
; The maximum number of keys (scripts) in the OPcache hash table.
\
; Only numbers between 200 and 1000000 are allowed.
\
;opcache.max_accelerated_files=10000
\
\
; The maximum percentage of "wasted" memory until a restart is scheduled.
\
;opcache.max_wasted_percentage=5
\
\
; When this directive is enabled, the OPcache appends the current working
\
; directory to the script key, thus eliminating possible collisions between
\
; files with the same name (basename). Disabling the directive improves
\
; performance, but may break existing applications.
\
;opcache.use_cwd=1
\
\
; When disabled, you must reset the OPcache manually or restart the
\
; webserver for changes to the filesystem to take effect.
\
;opcache.validate_timestamps=1
\
\
; How often (in seconds) to check file timestamps for changes to the shared
\
; memory storage allocation. ("1" means validate once per second, but only
\
; once per request. "0" means always validate)
\
;opcache.revalidate_freq=2
\
\
; Enables or disables file search in include_path optimization
\
;opcache.revalidate_path=0
\
\
; If disabled, all PHPDoc comments are dropped from the code to reduce the
\
; size of the optimized code.
\
;opcache.save_comments=1
\
\
; Allow file existence override (file_exists, etc.) performance feature.
\
;opcache.enable_file_override=0
\
\
; A bitmask, where each bit enables or disables the appropriate OPcache
\
; passes
\
;opcache.optimization_level=0x7FFFBFFF
\
\
;opcache.dups_fix=0
\
\
; The location of the OPcache blacklist file (wildcards allowed).
\
; Each OPcache blacklist file is a text file that holds the names of files
\
; that should not be accelerated. The file format is to add each filename
\
; to a new line. The filename may be a full path or just a file prefix
\
; (i.e., /var/www/x blacklists all the files and directories in /var/www
\
; that start with 'x'). Line starting with a ; are ignored (comments).
\
;opcache.blacklist_filename=
\
\
; Allows exclusion of large files from being cached. By default all files
\
; are cached.
\
;opcache.max_file_size=0
\
\
; Check the cache checksum each N requests.
\
; The default value of "0" means that the checks are disabled.
\
;opcache.consistency_checks=0
\
\
; How long to wait (in seconds) for a scheduled restart to begin if the cache
\
; is not being accessed.
\
;opcache.force_restart_timeout=180
\
\
; OPcache error_log file name. Empty string assumes "stderr".
\
;opcache.error_log=
\
\
; All OPcache errors go to the Web server log.
\
; By default, only fatal errors (level 0) or errors (level 1) are logged.
\
; You can also enable warnings (level 2), info messages (level 3) or
\
; debug messages (level 4).
\
;opcache.log_verbosity_level=1
\
\
; Preferred Shared Memory back-end. Leave empty and let the system decide.
\
;opcache.preferred_memory_model=
\
\
; Protect the shared memory from unexpected writing during script execution.
\
; Useful for internal debugging only.
\
;opcache.protect_memory=0
\
\
; Allows calling OPcache API functions only from PHP scripts which path is
\
; started from specified string. The default "" means no restriction
\
;opcache.restrict_api=
\
\
; Mapping base of shared memory segments (for Windows only). All the PHP
\
; processes have to map shared memory into the same address space. This
\
; directive allows to manually fix the "Unable to reattach to base address"
\
; errors.
\
;opcache.mmap_base=
\
\
; Enables and sets the second level cache directory.
\
; It should improve performance when SHM memory is full, at server restart or
\
; SHM reset. The default "" disables file based caching.
\
;opcache.file_cache=
\
\
; Enables or disables opcode caching in shared memory.
\
;opcache.file_cache_only=0
\
\
; Enables or disables checksum validation when script loaded from file cache.
\
;opcache.file_cache_consistency_checks=1
\
\
; Implies opcache.file_cache_only=1 for a certain process that failed to
\
; reattach to the shared memory (for Windows only). Explicitly enabled file
\
; cache is required.
\
;opcache.file_cache_fallback=1
\
\
; Enables or disables copying of PHP code (text segment) into HUGE PAGES.
\
; This should improve performance, but requires appropriate OS configuration.
\
;opcache.huge_code_pages=0
\
\
; Validate cached file permissions.
\
;opcache.validate_permission=0
\
\
; Prevent name collisions in chroot'ed environment.
\
;opcache.validate_root=0
\
\
; If specified, it produces opcode dumps for debugging different stages of
\
; optimizations.
\
;opcache.opt_debug_level=0
\
\
[curl]
\
; A default value for the CURLOPT_CAINFO option. This is required to be an
\
; absolute path.
\
curl.cainfo="C:\\xampp\\apache\\bin\\curl-ca-bundle.crt"
\
\
[openssl]
\
; The location of a Certificate Authority (CA) file on the local filesystem
\
; to use when verifying the identity of SSL/TLS peers. Most users should
\
; not specify a value for this directive as PHP will attempt to use the
\
; OS-managed cert stores in its absence. If specified, this value may still
\
; be overridden on a per-stream basis via the "cafile" SSL stream context
\
; option.
\
openssl.cafile="C:\\xampp\\apache\\bin\\curl-ca-bundle.crt"
\
\
; If openssl.cafile is not specified or if the CA file is not found, the
\
; directory pointed to by openssl.capath is searched for a suitable
\
; certificate. This value must be a correctly hashed certificate directory.
\
; Most users should not specify a value for this directive as PHP will
\
; attempt to use the OS-managed cert stores in its absence. If specified,
\
; this value may still be overridden on a per-stream basis via the "capath"
\
; SSL stream context option.
\
;openssl.capath=
\
\
; Local Variables:
\
; tab-width: 4
\
; End:
\
[Syslog]
\
define_syslog_variables=Off
\
[Session]
\
define_syslog_variables=Off
\
[Date]
\
date.timezone=Europe/Berlin
\
[MySQL]
\
mysql.allow_local_infile=On
\
mysql.allow_persistent=On
\
mysql.cache_size=2000
\
mysql.max_persistent=-1
\
mysql.max_link=-1
\
mysql.default_port=3306
\
mysql.default_socket="MySQL"
\
mysql.connect_timeout=3
\
mysql.trace_mode=Off
\
[Sybase-CT]
\
sybct.allow_persistent=On
\
sybct.max_persistent=-1
\
sybct.max_links=-1
\
sybct.min_server_severity=10
\
sybct.min_client_severity=10
\
[MSSQL]
\
mssql.allow_persistent=On
\
mssql.max_persistent=-1
\
mssql.max_links=-1
\
mssql.min_error_severity=10
\
mssql.min_message_severity=10
\
mssql.compatability_mode=Off
\
mssql.secure_connection=Off
\
}
